Detailed introduction

Working principle

The material is sent to the crushing chamber by the screw conveyor for crushing, and the pulverized material is then transported to the classification zone by the airflow generated by the end induced draft fan. The graded impeller is continuously rotated and separated, and the qualified material is sucked away by the induced draft fan, and the separated coarse powder is separated. The material slides from the inner cavity of the choke to the pulverization chamber to continue the secondary pulverization, so that the material is continuously pulverized to the desired particle size. Adjusting the classifying impeller by frequency conversion, the material fineness can be adjusted randomly without stopping

Features

1. Crushing and grading integration, you can adjust the grading wheel to obtain the desired product fineness.

2.The machine is simple in structure, low installed power, wide application range, high cost, strong, stable operation, good crushing effect.

3.The operation is simple, process granularity can adjusted randomly, and no need to stop replacement parts can achieve the required fineness requirements.

4. Fan parts using centrifugal fan, its large wind, high wind pressure, and the use of noise reduction measures, the use of low noise.

5. Filter components are flat bag filter, filter effect well, easy to replace the bag, long service life.

6. The system operates under the negative pressure, prevents the dust overflow, the working environment is good.

7. The airflow in the machine can play a role in cooling the material and the body.

8. Suitable for 2 ~75Um D50 between the product grinding.

Technical Parameters